Case Study

Factory Conveyor Inspection

Factory Conveyor Remote Visual Inspection

A plywood manufacturer needed to inspect the roller bearings for its main conveyor motors. This inspection required a shutdown of the entire production line, and every minute of downtime would cost money. Additionally, because the motors were located in hard to reach areas, some several meters high, a portable and lightweight instrument would be needed.

The VJ-3 3.9mm Video Borescope from ViewTech Borescopes was not only able to verify the condition of the roller bearings in record time, technicians used the onboard image capture capability of the inspection video borescope to document and archive pictures for future reference.

Weighing only 34 oz., the VJ-3 video borescope was by far the lightest instrument ever used for these inspections. Additionally, the one-handed operation afforded by the design of the scope provided an extra measure of convenience and safety for the technician.

Success Story

Over 10 Years Experience

RF System Lab was established in 2008 with the goal of bringing affordable, high-quality video borescopes to the market.


Learn More About the VJ-3


Request To Rent A Video Borescope

Complete the form below and one of our representatives will work with you to secure a rental borescope.

Call us at 231-943-1171

– Or –

Fill out the form below and one of our representatives will contact you.

  • This field is for validation purposes and should be left unchanged.